Add some editorial columns to your product pages
jtvunivmgmtllc.org
Rust-Oleum 248932, Gloss Black, 12 oz, Automotive Engine, 12 Ounce (Pack of 1)
- Regular Price
- $111.89
- Sale Price
- $111.89
- Regular Price
- $16.25
Sold Out
- Unit Price
- per
Sku:
16816071
Black, Rust-Oleum Automotive Engine Enamel Gloss Spray Paint-248932, 12 oz: Creates a smooth finish and is formulated for use on automotive engines and other automotive surfaces which reach intermittent temperatures up to 500°F (260°C). Oil-based formula resists chipping and peeling, dries to the touch in 20 minutes. Comes with an angle spray technology with comfort tip to reduce finger fatigue. Do not apply to surfaces that exceed 500°F
- Use on automotive engines and other automotive surfaces
- 12 oz. can provides coverage for up to 10 sq. ft.
- Gloss finish
- Oil-based formula resists chipping and peeling
- Rust preventive for a long-lasting finish
- Any-angle spray technology with comfort tip
- Do not apply to surfaces that exceed 500°F
- Excellent UV and weather resistance
- Dries to touch in 20 minutes
- Clean up with mineral spirits
Specifications
Features: Heat-Resistant, Handheld
Assembled Product Weight: 1 lb
Brand: Rust-Oleum
Color: Black
Manufacturer: Rust-Oleum
Manufacturer Part Number: 248932
Model: 248932
Type: Engine Paint
Material: Oil- Based
Assembled Product Dimensions (L x W x H): 2.62 x 2.62 x 7.88 Inches
Directions
Instructions: . Painting Conditions: Use outdoors or in a well-ventilated area such as an open garage. Use when temperature is between 50ºF (10ºC) and 90ºF (32ºC) and humidity is below 85% to ensure proper drying. Do not apply to galvanized metal. Avoid spraying in very windy, dusty conditions. Cover surrounding area to protect from spray mist. Preparation: Remove loose paint and rust with wire brush or sandpaper. Lightly sand glossy surfaces. Clean with soap and water, rinse and let dry. . Priming: Use of a Rust-Oleum Engine Primer provides superior adhesion and hiding and is especially recommended when applying Rust-Oleum Engine Enamel to bare metal. Painting: Shake can vigorously for one minute after mixing ball begins to rattle. Shake often during use. Hold can 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply 2 or more light coats a few minutes apart. Note: Engine Enamel features an advanced spray system that allows you to spray at any angle, even upside down for those hard to reach areas. A comfort spray tip with wider finger pad reduces fatigue caused by continuous spraying. Dry & Recoat Times: based on 70ºF - 50% relative humidity. Allow more time at cooler temperatures. Dries to the touch in 20 minutes, to handle in 1 hour. Apply a second coat or Clear coat within 1 hour or after 24 hours. Wait 7 days for paint to fully cure. Clean-up: Wipe off tip before storing. Clean up wet paint with Xylol or Mineral Spirits. Throw away empty can in trash pickup. Do not burn or place in home trash compactor. Clogging: If valve clogs, twist and pull off spray tip and rinse it in a solvent such as mineral spirits. Do not stick a pin or other objects into the stem. Squeeze and Pull
Safe Handling Instructions: WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-800-424-LEAD or log on to ww.epa.gov/lead. DANGER! EXTREMELY FLAMMABLE. VAPOR HARMFUL. VAPORS MAY CAUSE FLASH FIRE. CONTENTS UNDER PRESSURE. CONTAINS: TOLUENE AND XYLENE. Vapor harmful. May affect the brain or nervous system causing dizziness, headache or nausea. Causes eye, skin, nose and throat irritation. Do not puncture or incinerate (burn) container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not expose to heat or store at temperatures above 120ºF (48ºC). NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the content may be harmful or fatal. Vapors may ignite explosively. Keep away from heat, sparks and flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe dust, vapors or spray mist. Ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness, wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes, skin and clothing. First Aid: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical attention immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. WARNING: This product contains a chemical known in the state of California to cause cancer, birth defects or other reproductive harm. KEEP OUT OF REACH OF CHILDREN. FOR EMERGENCY, CALL YOUR PHYSICIAN, LOCAL POISON CONTROL CENTER OR LOCAL EMERGENCY ROOM. FOR PRODUCT HEALTH INFORMATION, CALL: (800) 481-4785.