Add some editorial columns to your product pages
jtvunivmgmtllc.org
Rust-Oleum Black Automotive Rubberized Undercoating Matte Spray Paint 15 Oz New.
- Regular Price
- $10.89
- Sale Price
- $10.89
- Regular Price
- $13.45
- Unit Price
- per
- Use on bare or primed metal including underbody and wheel wells of cars, trucks, trailers and other recreational vehicles
- Oil-based formula provides a durable, long-lasting finish, resists nicks and scratches
- Matte black textured finish
- 15 oz. can covers up to 18 sq. ft.
- Any-Angle Spray Technology with comfort tip
- Clean up with mineral spirits
- Do not apply to surfaces that exceed 200°F
- Excellent weather resistance
Specifications
Brand: Rust-Oleum
Manufacturer Part Number: 593236
Manufacturer: Rust-Oleum
Model: 593236
Assembled Product Weight: 1.274 POUNDS
Color: Black
Vehicle Type: Rust-Oleum
Assembled Product Dimensions (L x W x H): 2.62 x 2.62 x 9.50 Inches
Directions
Instructions: . Surface Preparation: Remove all rust, oil and grease from surfaces to be coated. Surface must be clean and dry. Mask off area to avoid overspray on auto finish. Apply to bare or primed metal surface. Application:. ? Shake can vigorously for one minute after mixing ball begins to rattle. Shake often during use. ? Hold can 12 - 16? from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface and in motion while spraying. ? Remove any overspray from the auto finish immediately. ? For the best results, apply two coats (allow product to dry for 1-2 minutes between coats). ? Air dry for a minimum of one hour. Clogging: If valve clogs, twist and pull off spray tip and rinse it in a solvent such as mineral spirits. Do not stick a pin or other object in the steam.
Safe Handling Instructions: DANGER! EXTREMELY FLAMMABLE. VAPOR HARMFUL. VAPORS MAY CAUSE FLASH FIRE. CONTENTS UNDER PRESSURE. DANGER: TOLUENE. Vapor harmful. May affect the brain or nervous system causing dizziness, headache or nausea. Causes eye, skin, nose and throat irritation. DO NOT PUNCTURE, STRIKE, OR INCINERATE (BURN) CONTAINER. Exposure to heat or prolonged exposure to sun may cause bursting. Do not expose to heat or store at temperatures above 120°F. NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. VAPORS MAY IGNITE EXPLOSIVELY. Keep away from heat, sparks and flame. Do not smoke. Extinguish all flames and pilot lights and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. USE ONLY WITH ADEQUATE VENTILATION. Do not breath dust, vapors or spray mist. Ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits, wear an appropriate, properly fitted respirator (NIOSH approved) during and after application. Follow respirator manufacturer's directions for respirator use. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. FIRST AID: If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention; for skin, wash thoroughly with soap and water. WARNING: This product contains a chemical known in the state of California to cause cancer and birth defects or other reproductive harm. KEEP OUT OF REACH OF CHILDREN. INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING AND INHALING THE CONTENTS MAY BE HARMFUL OR FATAL. DO NOT STORE ABOVE 120 F (48 C). FOR EMERGENCY, call your physician, local poison control center or local emergency room. For product health information, call: (800) 481-4788. Conforms to ASTM D-4236.